PRODUCT

We are a professional company that can supply
and suggest optimal solutions.

Industrial Storage & Memory

M.2 SATA

S745-M80

128GB / 256GB / 512GB / 1TB / 2TB

Equipped with 112-layer 3D NAND with I/O efficiency increased up to 50% (*compared to the 96-layer 3D NAND)

Built-in LDPC ECC for error correction

Supports S.M.A.R.T. Function (exclusive smart tool software developed by TEAMGROUP)

Global wear leveling technology

Supports NCQ

Supports ATA

Supports TRIM Commands

Bad Block Managements

컨텐츠 정보

본문

Durable Industrial-Grade 112-layer Flash Memory

Equipped with the latest 3D NAND technologies which allow memory cells to be stacked up to 112 layers, a drastic increase in unit density from the former 96 layers. The additional layers help reduce read latency, increase storage efficiency, and enhance data protection.

proIns_img02

Supports SLC Caching Technology & Drastically Increases Computing Efficiency

Uses SLC direct to TLC technology to segment the SSD. Designated sections simulate SLC to deliver higher transmission speeds, which can help increase the SSD's read/write speeds.

proIns_img02

Supports error correction codes (ECC) such as LDPC + TRIM commands + Global Wear Leveling technology + End-to-end data protection

  • Ensures accuracy of data transmissions and extends the service life of the internal flash memory.
  • Primarily applied to increase the efficiency of garbage collection in the industrial SSD to maintain peak performance and ensure a fast writing process.
  • Prioritize areas with low read/write cycles for writing to ensure that writing is evenly distributed across the device, thereby prolonging service life.
  • Ensures data integrity at every step. From when it enters the industrial SSD to until it leaves, each piece of data is protected to guarantee data integrity during each transmission.
proIns_img02

Supports S.M.A.R.T. Function (exclusive smart tool software developed by TEAMGROUP) (Taiwan Invention Patent: I751753)

S.M.A.R.T. is a smart tool software developed exclusively by TEAMGROUP that allows users to monitor the product's health and optimize performance accordingly. Its main function is to check disk info, system information, and read/write speed. With S.M.A.R.T., users can check up on the industrial SSD's operational status anytime they want.

proIns_img02
proIns_img02
Interface
SATA III 6.0Gb/s
Flash Type
3D TLC
Capacity
64GB / 128GB / 256GB / 512GB / 1TB / 2TB
Sequential R/W
545 / 480MB/s (Max.)
Max. Power consumption
3.3V x 240mA
Dimension
80.0(L) x 22.0(W) x 3.5(H) mm
Shock
Operation: 50G / 11ms (compliant with MIL-STD-202G Test condition A) Non-operation: 1,500G / 0.5ms (compliant with MIL-STD-883K Test condition B)
Vibration
Operation: 7.69 Grms, 20~2,000 Hz / random (compliant with MIL-STD-810G General) Non-operation: 4.02 Grms, 15 ~ 2,000 Hz / sine (compliant with MIL-STD-810G General)
MTBF
> 3 million hours
Storage Temperature
-55°C (-67°F) ~ +95°C (+203°F)
Operation Temperature
Standard Temp.: 0°C (+32°F) ~ +70°C (+158°F)
Wide Temp.: -40°C(-40°F) ~ +85°C(+185°F)
Humidity
5% ~ 95%
P/E Cycle
3K P/E Cycles
Thermal Sensor
✓
External DRAM Buffer
×
TRIM
✓
S.M.A.R.T.
✓
Warranty
3-year limited warranty
NOTES：
We reserve the right to modify product specifications without prior notice.
 

 
 

관련자료